Huawei Quidway S8500 Series Command Manual page 1155

Command Manual – System Management
Quidway S8500 Series Routing Switches
Description
Use the peer-public-key end command to exit from the public key view and return to
the system view.
Related command: rsa peer-public-key, public-key-code begin.
Example
# Exit the public key view and save the configuration.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rsa peer-public-key quidway003
RSA public key view: return to System View with "peer-public-key end".
[Quidway-rsa-public-key] peer-public-key end
[Quidway]
8.1.7 protocol inbound
Syntax
protocol inbound { all | pad | ssh | telnet }
View
VTY user interface view
Parameter
all: Supports all protocols, including Telnet and SSH.
ssh: Supports the SSH protocol only, and does not support the Telnet protocol.
telnet: Supports the Telnet protocol only, and does not support the SSH protocol.
Description
Use the protocol inbound command to specify the protocol supported by the current
user interface.
By default, all protocols are supported.
This configuration takes effect at the next login. Note that after enabling SSH by this
command, you still cannot log in through SSH if the client RSA key is not configured.
Chapter 8 SSH Terminal Service Configuration
Huawei Technologies Proprietary
8-6
Commands