Clock Summer-Time - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
View
User view
Parameter
zone-name: Name of the summer time, which is a string with the length ranging 1 to 32
characters.
one-off: Only set the summer time of a certain year.
repeating: Set the summer time of every year starting from a certain year.
start-time:
(hour/minute/second).
start-date: Set start date of the summer time, input like YYYY/MM/DD
(year/month/day).
end-time:
(hour/minute/second).
end-date: Set end date of the summer time, input like YYYY/MM/DD (year/month/day).
offset-time:
(hour/minute/second).
Description
Use the clock summer-time command to set the name, starting and ending time of the
summer time.
Use the undo clock summer-time command to remove the configuration of the
summer time.
After the configuration takes effect, the display clock command can be used to check
it. Besides, the time of the log or Debugging information uses the local time after the
adjustment of the time zone and summer time.
Related command: clock timezone.
Example
# Set the summer time for z2 that starts at 06:00:00 on 08/06/2002 and ends at
06:00:00 on 01/09/2002 with the time adding 1 hour.
<Quidway> clock summer-time z2 one-off 06:00:00 2002/06/08 06:00:00 2002/09/01
01:00:00
# Set the summer time for z2 that starts at 06:00:00 on 08/06 and ends at 06:00:00 on
01/09 in each year from 2002 on with the time adding 1 hour.
<Quidway>
2002/09/01 01:00:00
Set start time of
Set end time of
Set offset time
clock summer-time
Huawei Technologies Proprietary
Chapter 4 System Maintenance Commands
the summer time,
the summer time,
of the summer time,
z2 repeating 06:00:00
4-2
input like HH:MM:SS
input like HH:MM:SS
input like HH:MM:SS
2002/06/08 06:00:00