Mpls Ldp; Mpls Ldp Enable - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
TCP Connection: 1.1.1.9 <- 4.4.4.9
Session State: Operational
Session Role: Passive
Session existed time:
Basic Hello Packets Sent/Received: 85/67
KeepAlive Packets Sent/Received: 1/1
Negotiated Keepalive hold time: 60
LDP Basic Discovery Source((A) means active):
Inter vlan113(A)
Inter vlan111

1.2.9 mpls ldp

Syntax
mpls ldp
undo mpls ldp
View
System view
Parameter
None
Description
Use the mpls ldp command to enable LDP.
Use the undo mpls ldp command to disable LDP.
By default, LDP is disabled.
Before enabling LDP, you must enable MPLS and configure LSR ID first.
Related command: mpls lsr-id.
Example
# Enable LDP.
<Quidway>system-view
[Quidway] mpls ldp

1.2.10 mpls ldp enable

Syntax
mpls ldp enable
mpls ldp disable
Chapter 1 MPLS Basic Configuration Commands
Inter vlan112
Huawei Technologies Proprietary
1-20
Peer PV Limit: 0