Command Manual – System Management
Quidway S8500 Series Routing Switches
Parameter
None
Description
Use the debugging command to enable the debugging for FTP Client commands.
Use the undo debugging command to disable the debugging for FTP Client
commands.
By default, the debugging for FTP Client commands is disabled.
Example
# Enable the debugging for FTP Client commands.
<Quidway> ftp
[ftp] debugging
1.4.8 delete
Syntax
delete remotefile
View
FTP Client view
Parameter
remotefile: File name.
Description
Use the delete command to cancel the specified file.
Example
# Delete the file temp.c
<Quidway>ftp
[ftp] delete temp.c
1.4.9 dir
Syntax
dir [ filename ] [ localfile ]
View
FTP Client view
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-32