Traffic-Statistic - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Note:
Traffic redirection setting is only available for the permit rules in the ACL.
The packet redirected to the CPU cannot be forwarded normally.
You can achieve policy route by selecting the next-hop keyword in this command.
Example
# Redirect to the CPU the packets of VLAN2 that match the permit rules in ACL 3000.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] traffic-redirect inbound ip-group 3000 cpu

4.1.6 traffic-statistic

Syntax
traffic-statistic inbound ip-group { acl-number | acl-name } [ rule rule
[ system-index index ] ]
undo traffic-statistic inbound ip-group { acl-number | acl-name } [ rule rule ]
View
VLAN view
Parameter
ip-group { acl-number | acl-name }: Activates IP ACLs, including basic and advanced
ACLs. acl-number: Sequence number of ACL, ranging from 2000 to 3999. acl-name:
Name of the ACL, which must be a character string starting with an English letter (a-z or
A-Z), and without any space or quotation mark in it.
rule rule: Specifies the subitem of an active ACL, ranging from 0 to 127; if not specified,
all subitems of ACL will be activated.
system-index index: Specifies the system index value of the rule which will be indexed
during operation. After delivering a rule, the system automatically assigns a globally
unique index value to the rule. When using this command to deliver a rule, you can also
specify a system index value for the rule. In general, you are not recommended to
specify this parameter manually.
Description
Use the traffic-statistic command to activate an ACL and run traffic statistics for the
matching data flow in VLAN (only available for the permit rules in the ACL).
Chapter 4 VLAN-ACL Configuration Commands
Huawei Technologies Proprietary
4-9