Close Port; Display Hgmpserver - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
# Save the configuration information retrieved by the save lswconfig command to the
flash memory.
[Quidway-hgmp] backup lswconfig
Write lanswitch configuration to flash......

1.1.3 close port

Syntax
close port port-list
undo close port port-list
View
lanswitch view
Parameter
port-list: List of ports to be set. Be sure to provide a valid port number if you want to
specify a single port. You can input a single number for the argument, which identifies
one object. You can input a character string in such format as 3-7, which identifies
objects 3 through 7. You can also use commas to connect single numbers and
character strings.
Description
Use the close port command to close the specified ports of the Ethernet switch.
Use the undo close port command to enable the specified ports of the Ethernet
switch.
You can use the query port command to verify these two commands.
The close port command may cause the communication between Ethernet switches
and the management device being terminated. To avoid this, the upstream ports are not
allowed to be closed. By default, upstream ports are enabled.
Related command: query port.
Example
# Close port 1 and port 2 of the Ethernet switch.
[Quidway-lanswitch3/1/6-/] close port 1,2
Waiting.....
Operating LANSWITCH[3/1/6-/]'s ports successfully!

1.1.4 display hgmpserver

Syntax
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-4