Huawei Quidway S8500 Series Command Manual page 631

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
A delay, about one minute, exists in system's updating ACLs, but the result of the
display time-range command is based on the current time. Then there may the case
where a time range have been shown active using the display time-range command,
while it is still inactive in importing the ACL. You just take it as a normal case.
Related command: time-range.
Example
# Display all time ranges.
<Quidway> display time-range all
Current time is 14:36:36 4-3-2003 Thursday
Time-range : hhy ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
Time-range : hhy1 ( Inactive )
from 08:30 2-5-2003 to 18:00 2-19-2003
Table 1-2 Description of displayed information
Current
4-3-2003 Thursday
Time-range : hhy ( Inactive )
from 08:30 2-5-2005 to 18:00
2-19-2005
# Display time range tm1.
<Quidway> display time-range tm1
Current time is 14:37:31 4-3-2003 Thursday
Time-range : tm1 ( Inactive )
from 08:30 2-5-2005 to 18:00 2-19-2005
Field
time is 14:36:36
Huawei Technologies Proprietary
Description
The current time of the system
Time range hhy. "Inactive" means that the time
range is inactive currently (active means the time
range is active), and the time range is from 08:30
2-5-2005 to 18:00 2-19-2005
The displayed information below is similar.
1-7
Chapter 1 ACL Commands