Search Multiaddr - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Note:
This command is not applicable to the configuration of S2008B, S2026B, S2016B,
S2403F and S2403 switches on the NMS.

1.3.24 search multiaddr

Syntax
search multiaddr mac-addr-list vlanid vlanid-list
View
lanswitch view
Parameter
mac-addr-list: List of MAC addresses to be searched. This argument can contain up to
four MAC addresses.
vlanid-list: List of VLAN IDs corresponding to those specified by the mac-addr-list
argument.
Description
Use the search multiaddr command to search specified multicast addresses in the
address table of an Ethernet switch.
Example
# Search an address entry in the multicast address table of the Ethernet switch with a
position parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] search multiaddr 01e0-fc01-0001 vlanid 2
Waiting.....
==================Search addrTab result========================
No ErrNo
0
===================================================================
ErrNo Mean:0-Success,1-invalid Mac,2-Vlanid out rang 5-not found addrTab
Mac-Address
0 01-e0-fc-01-00-01
Huawei Technologies Proprietary
Chapter 1 HGMP V1 Configuration Commands
VlanId Port
1 - -
1-47
Aged PortMask mcType
0 -