Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan traffic-limit command to display the parameter
configuration for traffic limit, including the configuration information about related ACL
and policing actions.
Related command: traffic-limit and traffic-params.
Example
# Display the parameter configuration of traffic limit.
<Quidway> display qos-vlan traffic-limit
Vlan 1 traffic-limit
Inbound:
There is no configuration.
Vlan 2 traffic-limit
Inbound:
Matches: Acl 2000 rule 3
Committed Information Rate: 8192 Kbps
Committed Burst Size: 10000 byte(s)
Excess Burst Size: 20000 byte(s)
Peak Information Rate: 0 Kbps
Exceed action: drop
2.1.16 display qos-vlan traffic-priority
Syntax
display qos-vlan [ vlan-id ] traffic-priority
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan traffic-priority command to display the priority marking
configuration, including the ACL associated with the traffic priority marking, the type
and value of the priority marking.
Related command: traffic-priority.
running
Huawei Technologies Proprietary
2-13
Chapter 2 QoS Commands