Import-Route - Huawei Quidway S8500 Series Command Manual

Routing switches
Hide thumbs Also See for Quidway S8500 Series:
Table of Contents

Advertisement

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Use the if-match vpn-target begin vpn-target count command to set the start value
and the total number of the vpn-target values to be matched.
Example
# Define an if-match clause to match the following VPN-target attribute values: 100:1,
200:1, 300:1, 300:2 and 400:3.
[Quidway-route-policy] if-match vpn-target 100:1 200:1 300:1 300:2 400:3
With the above configuration, if a route's attribute value is 100:1 300:1, the route will
pass the matching; if the route's attribute value is 200:1 500:1, it will not pass the
matching because 500:1 is not one of the attribute values that have been configured.
# Define an if-match clause to match ten VPN-target attribute values starting from
100:1, that is, 100:1 to 100:10.
[Quidway-route-policy] if-match vpn-target begin 100:1 10
# Define an if-match clause to match five VPN-target attribute values starting from
1.1.1.1:65533, that is, 1.1.1.1:65533, 1.1.1.1:65534, 1.1.1.1:65535, 1.1.1.2:0, and
1.1.1.2:1.
[Quidway-route-policy] if-match vpn-target begin 1.1.1.1:65533 5

2.1.19 import-route

syntax
import-route { { ospf | ospf-ase | ospf-nssa } [ process-id ] | direct | rip | static } [med
value | route-policy route-policyname ]
undo import-route { { ospf | ospf-ase | ospf-nssa } [ process-id ] | direct | rip | static }
View
VPN-instance subaddress family view
Parameter
process-id: OSPF process ID, ranging from 1 to 65535. By default, it is 1.
ospf: Imports only the ASE internal route discovered by the OSPF process process-id
as the external route.
ospf-ase: Imports only the OSPF-ASE route discovered by OSPF process with
process-id as the external route.
ospf-nssa: Imports only the OSPF-NSSA route discovered by OSPF process with
process-id as the external route.
med value: Route cost value, ranging from 0 to 4294967295.
route-policyname: name of Route-policy, consisting of 1 to 19 characters
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-17

Advertisement

Table of Contents
loading

Table of Contents