Qos Cos-Drop-Precedence-Map - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
qos conform-level conform-level-value
View
System view
Parameter
conform-level conform-level-value: Conform level, in the range of 0 to 2 inclusive.
Description
Use the qos conform-level command to create a conform level and enter it.
There are three conform levels available, numbered as 0, 1 and 2. Type the conform
level value and you can enter the corresponding view. In the conform level view, you
can configure the "DSCP + Conform-level —> Service-parameter" mapping table, "EXP
+ Conform-level —> Service-parameter" mapping table and the "Local-precedence +
Conform-level —>802.1p" mapping table.
Example
# Create the conform level 0 view and enter it.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] qos conform-level 0
[Quidway-conform-level-0]

2.1.27 qos cos-drop-precedence-map

Syntax
qos cos-drop-precedence-map
cos2-map-drop-prec cos3-map-drop-prec cos4-map-drop-prec cos5-map-drop-prec
cos6-map-drop-prec cos7-map-drop-prec
undo qos cos-drop-precedence-map
View
System view
Parameter
cos0-map-drop-prec: Mapping value from CoS 0 to drop precedence, in the range of 0
to 2.
cos1-map-drop-prec: Mapping value from CoS 1 to drop precedence, in the range of 0
to 2.
cos2-map-drop-prec: Mapping value from CoS 2 to drop precedence, in the range of 0
to 2.
cos0-map-drop-prec
Huawei Technologies Proprietary
2-25
Chapter 2 QoS Commands
cos1-map-drop-prec