Peer Group; Peer Ip-Prefix Export - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches

2.1.40 peer group

Syntax
peer peer-address group group-name [ as-number as-number ]
undo peer peer-address
View
VPNv4 subaddress family view, VPN-instance subaddress family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
peer-address: Peer IP address in dotted decimal format.
as-number: Peer AS number in the range of 1 to 65535. This parameter is only effective
in the BGP view and VPN-instance subaddress family view.
Description
Use the peer group command to add a peer to an existing peer group.
Use the undo peer command to delete a specified peer from the group.
In BGP view and VPN-instance subaddress family view, when adding a peer to an
external group out of an AS, you need to specify an AS number. When adding a peer to
an internal group or an external group in an AS, the AS number is not needed.
A peer must have been added in a group in BGP view before it can be added to another
group in multicast subaddress family view or VPNv4 subaddress family view.
In different address families, one peer can be in different groups and one group may
have different peers.
Example
# Add the peer with IP address 10.1.1.1 to the peer group test. In this example, the peer
group is IBGP peer by default, thus you need not to specify the AS number when
adding peers.
[Quidway-bgp] ipv4-family vpnv4
[Quidway-bgp-af-vpn] peer 10.1.1.1 group test

2.1.41 peer ip-prefix export

Syntax
peer group-name ip-prefix prefixname export
undo peer group-name ip-prefix prefixname export
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-35