Display Mpls Ldp Lsp - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Interface Vlan-interface194(address=192.4.1.1):
Label distributing enabled,bound to entity:2.2.2.2:0
Generic label range configured:16 -
Label Advertisement Mode: Downstream-Unsolicited
Configured KeepAlive hold time:60, Configured Hello hold time:15
Negotiated Hello hold time:0
Hello packets sent/rcv:15296/0

1.2.5 display mpls ldp lsp

Syntax
display mpls ldp lsp [ | begin text | exclude text | include text ]
View
Any view
Parameter
|: Displays matched outputs.
begin: Displays the outputs matching the regular expression from the first line.
exclude: Displays the outputs excluding those lines matching the regular expression.
include: Displays only those outputs matching the regular expression.
text: Contents of the regular expression.
Description
Use the display mpls ldp lsp command to view relevant LSP information created via
LDP.
Related command: display mpls lsp.
Example
# Display LSP.
<Quidway-Ethernet3/1/0> display mpls ldp lsp
--------------------------------------------------------------------------
------
--------------------------------------------------------------------------
------
No. FECType DestAddress
1 PREFIX
2 PREFIX
3 PREFIX
4 PREFIX
LDP LSP Information
InLab OLab UHC DHC Next-Hop
2.2.2.2 3
2.2.2.2 3
192.4.1.0/24 3
192.4.1.0/24 3
Huawei Technologies Proprietary
1-15
Chapter 1 MPLS Basic Configuration Commands
44800
---- 0 1 127.0.0.1
---- 0 1 127.0.0.1
---- 0 1 192.4.1.1
---- 0 1 192.4.1.1
OutInterface
InLoop0
InLoop0
Vlan194
Vlan194