Peer Route-Update-Interval - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
peer-address: Peer IP address in dotted decimal format.
policy-name: Name of the applied routing policy.
Description
Use the peer route-policy import command to apply a routing policy to peer for
received routing information.
Use the undo peer route-policy import command to delete the setting.
By default, there is no routing policy.
The incoming filtering policy configured for peers take precedence over the
configuration for peer groups.
Related command: peer route-policy export.
Example
# Apply the routing policy test-policy to the incoming routes of the peer group test.
[Quidway-bgp] ipv4-family vpnv4
[Quidway-bgp-af-vpn] peer test route-policy test-policy import

2.1.50 peer route-update-interval

Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
VPN-instance subaddress family view
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
seconds: Update interval in seconds, ranging from 0 to 600.
Description
Use the peer route-update-interval command to set the Update interval for peers.
Use the undo peer route-update-interval command to restore the default setting.
By default, the Update interval is 5 seconds for IBGP peer group, and for EBGP it is 30
seconds.
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-42