Retry Stop-Accounting - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Parameter
retry-times: Specifies the maximum times of real-time accounting request failing to be
responded, ranging from 1 to 255. By default, the accounting request can fail to be
responded up to 5 times.
Description
Use the retry realtime-accounting command to configure the maximum times of
real-time accounting request failing to be responded.
Use the undo retry realtime-accounting command to restore the maximum times of
real-time accounting request failing to be responded to the default value.
RADIUS server usually checks if a user is online with timeout timer. If the RADIUS
server has not received the real-time accounting packet from NAS, it will consider that
there is line or device failure and stop accounting. Accordingly, it is necessary to
disconnect the user at NAS end and on RADIUS server synchronously when some
unexpected failure occurs. Quidway Series Switches support to set maximum times of
real-time accounting request failing to be responded. NAS will disconnect the user if it
has not received real-time accounting response from RADIUS server for some
specified times.
How to calculate the value of count? Suppose RADIUS server connection will timeout
in T and the real-time accounting interval of NAS is t, then the integer part of the result
from dividing T by t is the value of count. Therefore, when applied, T is suggested the
numbers which can be divided exactly by t.
Related command: radius scheme, timer realtime-accounting.
Example
# Allow the real-time accounting request failing to be responded for up to 10 times.
[Quidway-radius-huawei] retry realtime-accounting 10

2.2.20 retry stop-accounting

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Parameter
retry-times: Maximal retransmission times of a buffered stop-accounting request,
ranging from 10 to 65535. By default, the value is 500.
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-40
Configuration Commands