Huawei Quidway S8500 Series Command Manual page 557

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
View
Any view
Parameter
interface-type interface-number: Interface type and interface number, used to specify
the interface.
Description
Use the display pim interface command to view the PIM interface configuration
information.
If no interface type or interface number is specified, this command displays the PIM
configurations on all interfaces. If the interface type and interface number are specified,
only the PIM configuration on the specified interface is displayed.
Example
# Display the PIM configuration information on an interface.
<Quidway> display pim interface vlan 2
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
PIM neighbor hold-time is 105 seconds
PIM neighbor limit is 128
PIM neighbor policy is none
Total 1 PIM neighbor on interface
PIM DR(designated router) is 10.10.1.20
Table 5-2 Description output information of the display pim interface command
PIM version
PIM mode
PIM query interval
PIM neighbor hold-time
PIM neighbor limit
PIM neighbor policy
Field
Version of PIM
PIM mode enabled on the interface (DM or SM)
Hello packet interval
Hold-time of PIM neighbor
Limit of the PIM neighbors on an interface. No
neighbor can be added any more when the limit is
reached
Filtering policy of the PIM neighbors on the current
interface
Huawei Technologies Proprietary
Chapter 5 PIM Configuration Commands
Description
5-9