Huawei Quidway S8500 Series Command Manual page 334

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf brief command to view the main summary of OSPF.
Example
# Display the OSPF summary.
<Quidway> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
OSPF Protocol Information
RouterID: 10.110.95.189
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 16
Area Count: 1
Area 0.0.0.0:
Authtype: none
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 3-3 Description of the fields of the display ospf brief command
RouterID
Border Router
spf-schedule-interval
Authtype
Routing preference
Border Router: Area AS
Nssa Area Count: 0
Flags: <>
Type: Broadcast
Field
Router ID of the router
Border routers for connection to the area, including
autonomous system border router (ASBR) and area
border router (ABR)
Interval of SPF schedule in seconds
Authentication type of OSPF
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10. While that of the external route of OSPF
is 150 by default
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Description
3-14