Peer Next-Hop-Local - Huawei Quidway S8500 Series Command Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Description
Use the peer ip-prefix import command to configure the route filtering policy of routes
received by the peer/peer group based on the ip-prefix.
Use the undo peer ip-prefix import command to cancel the route filtering policy of the
peer/peer group based on the ip-prefix.
By default, the route filtering policy of the peer/peer group is not specified.
The priority of the inbound filter policy configured for the peer is higher than that
configured for the peer group.
Related command: peer ip-prefix export.
Example
# Configure the route filtering policy of the peer group based on the ip-prefix 1.
[Quidway-bgp] peer group1 ip-prefix list1 import

5.1.48 peer next-hop-local

Syntax
peer group-name next-hop-local
undo peer group-name next-hop-local
View
BGP view
Parameter
group-name: Specifies the name of the peer group.
Description
Use the peer next-hop-local command to configure to perform the process of the next
hop in the route to be advertised to the peer/peer group and take the address of itself as
the next hop.
Use the undo peer next-hop-local command to cancel the existing configuration.
Example
# When BGP distributes the routes to the peer group "test", it will take its own address
as the next hop.
[Quidway-bgp] peer test next-hop-local
Huawei Technologies Proprietary
5-42
Chapter 5 BGP Configuration Commands