Terminal Trapping - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
By default, enable these functions for the console user and disable them for the
terminal user.
This command only takes effect on the current terminal where the commands are input.
The debugging/log/trap information can be output to the current terminal, beginning in
user view. When the terminal monitor is shut down, no debugging/log/trap information
will be displayed in local terminal, which is equals to having performed undo terminal
debugging, undo terminal logging, undo terminal trapping commands. When the
terminal monitor is enabled, you can use terminal debugging / undo terminal
debugging, terminal logging / terminal logging and terminal trapping / undo
terminal trapping respectively to enable or disable the corresponding functions.
Example
# Disable the terminal monitor.
<Quidway> undo terminal monitor

4.6.23 terminal trapping

Syntax
terminal trapping
undo terminal trapping
View
User view
Parameter
None
Description
Use the terminal trapping command to enable terminal trap information display.
Use the undo terminal trapping command to disable this function.
By default, this function is enabled.
Example
# Enable trap information display.
<Quidway> terminal trapping
Huawei Technologies Proprietary
4-57
Chapter 4 System Maintenance Commands