Ftp Server Enable - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
View
System view
Parameter
user-name: user name of FTP that is to be disconnected.
Description
Use the ftp disconnect command to disconnect an FTP user.
Example
# Disconnect the FTP user ftptest.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ftp disconnect ftptest

1.3.4 ftp server enable

Syntax
ftp server enable
undo ftp server
View
System view
Parameter
None
Description
Use the ftp server enable command to start FTP Server and enable FTP user logon.
Use the undo ftp server command to close FTP Server and disable FTP user logon.
By default, FTP Server is shut down.
Perform this command to easily start or shut down FTP Server, preventing Ethernet
Switch from being attacked by some unknown user.
Example
# Shut down FTP Server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo ftp server
% Close FTP server
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-23