Huawei Quidway S8500 Series Command Manual page 890

Command Manual – Security
Quidway S8500 Series Routing Switches
View
System view
Parameter
all : Configures to disconnect all connection.
access-type dot1x: Configures to disconnect the user connections that are of
specified access category.
dot1x: Specifies 802.1x users.
gcm: Specifies GCM users.
mac-authentication: Specifies users authenticated by MAC addresses.
domain domain-name: Configures to cut the connection according to ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
mac mac-address: Configures to cut the connection of the supplicant whose MAC
address is mac-address. The argument mac-address is in the hexadecimal format
(x-x-x).
radius-scheme radius-server-name: Configures to cut the connection according to
RADIUS scheme name. radius-server-name specifies the RADIUS server name with a
character string not exceeding 32 characters.
interface interface-type interface-num: Configures to cut the connection according to
the port.
ip ip-address: Configures to cut the connection according to IP address.
vlan vlanid: Configures to cut the connection according to VLAN ID. Here, vlanid
ranges from 1 to 4094.
ucibindex ucib-index: Configures to cut the connection according to ucib-index. Here,
ucib-index ranges from 0 to 2311.
user-name user-name: Configures to cut the connection according to user name .
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 55 characters.
Description
Use the cut connection command to disconnect a user or a category of users by force.
Related command: display connection.
Example
# Cut all the connections in the ISP domain, huawei163.net.
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-4
Configuration Commands