Display Clock Priority - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Description
Use the display clock self-test-result command to query the clock self test result.
Example
# Query the clock self test result.
<Quidway> display clock self-test-result
Clock module work mode: normal
Detail test report:

4.2.16 display clock priority

Command
display clock priority
View
Any view
Parameter
None
Description
Use the display clock priority command to query the priority levels of the 18 clock
sources.
Example
# Query the priority levels of the 18 clock sources.
<Quidway> display clock priority
reference
1
2
SRAM : normal
Output 38.88MHz signal: normal
PLL TRU050 : normal
PLL 88915 : normal
OSC : normal
I2C bus : normal
EPLD : normal
HDLC : normal
E1a : normal
E1b : normal
priority
255
4
Huawei Technologies Proprietary
Chapter 4 System Maintenance Commands
4-16