Mpls L2Vpn Encapsulation - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Example
# Configure LSR ID and enable MPLS.
[Quidway] mpls lsr-id 10.0.0.1
[Quidway] mpls
# Enable L2VPN.
[Quidway] mpls l2vpn

3.3.7 mpls l2vpn encapsulation

Syntax
mpls l2vpn vpn-name [ encapsulation { ethernet | vlan } ]
undo mpls l2vpn vpn-name
View
System view
Parameter
vpn-name: Name of the VPN, which must be unique in the PE. This argument is 1 to 20
characters in length.
encapsulation: User access encapsulation type. Two types are supported currently:
Ethernet access and VLAN access. The default encapsulation type is Ethernet.
Description
Use the mpls l2vpn encapsulation command to create a Kompella MPLS L2VPN,
specify the encapsulation type, and enter MPLS L2VPN view.
Use the undo mpls l2vpn command to remove a Kompella MPLS L2VPN.
Related command: ce, mtu.
Note:
You can create a Kompella MPLS L2VPN only after you enable MPLS L2VPN. All
L2VPN parameters are configured in L2VPN view.
Example
# Create a Kompella MPLS L2VPN, with the name of Huawei, the encapsulation type of
Ethernet.
[Quidway] mpls l2vpn huawei encapsulation ethernet
[Quidway-mpls-l2vpn-huawei]
Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-15