Remote-Ip - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches

1.2.19 remote-ip

Syntax
remote-ip remoteip
View
remote-peer view
Parameter
remoteip: IP address of the Remote-peer.
Description
Use the remote-ip command to configure a Remote-IP address. The address should
be the lsr-id of the remote LSR. As Remote Peers adopt LSR ID as their transport
addresses, the last two Remote Peers use the lsr-id as their transport addresses for
creating TCP connection.
Related command: mpls ldp remote-peer.
Example
# Configure the address of remote-peer.
<Quidway>system-view
[Quidway] mpls ldp remote-peer 12
[Quidway-mpls-remote12] remote-ip 192.168.1.1
Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-28