Display Schedule Reboot - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
View
Any view
Parameter
power-ID: Power ID.
Description
Use the display power command to view the working state of the built-in power supply.
Example
# Show power state.
<Quidway> display power
Power
Power
Power

3.1.10 display schedule reboot

Syntax
display schedule reboot
View
Any view
Parameter
None
Description
Use the display schedule reboot command to check the configuration of related
parameters of the switch schedule reboot terminal service.
Related command: reboot, schedule reboot at.
Example
# Display the configuration of the schedule reboot terminal service parameters of the
current switch.
<Quidway> display schedule reboot
System will reboot at 16:00:00 2004/11/1 (in 2 hours and 5 minutes).
1 State: Absent
2 State: Normal
3 State: Absent
Huawei Technologies Proprietary
Chapter 3 Device Management Commands
3-7