Snmp-Agent Usm-User - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
v1: V 1 security mode.
v2c: V 2 security mode.
v3: V 3 security mode.
group-name: Group name, ranging from 1 to 32 bytes.
authentication: With this parameter, the system will authenticate SNMP data without
encrypting it.
privacy: Authenticates and encrypts packets.
read-view: Sets read-only view.
read-view: Name of read-only view, ranging from 1 to 32 bytes.
write-view: Permits to set read-write view.
write-view: Name of read-write view, ranging from 1 to 32 bytes.
notify-view: Sets notify view.
notify-view: Name of notify view, ranging from 1 to 32 bytes.
acl acl-number: Number identifier of basic number-based ACLs, ranging from 2000 to
2999.
Description
Use the snmp-agent group command to configure a new SNMP group and reference
the ACL to perform ACL control to the network management users by acl acl-number.
Use the undo snmp-agent group command to remove a specified SNMP group.
Example
# Create a SNMP group "huawei", and reference the ACL 2001 to perform ACL control
to the network management users (basic ACL 2001 has already been defined).
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent group v1 huawei acl 2001

3.1.4 snmp-agent usm-user

Syntax
snmp-agent usm-user { v1 | v2c } user-name group-name [ acl acl-number ]
undo snmp-agent usm-user { v1 | v2c } user-name group-name
snmp-agent usm-user v3 user-name group-name [ authentication-mode { md5 |
sha } auth-password ] [ privacy des56 priv-password ] [ acl acl-number ]
undo snmp-agent usm-user v3 user-name group-name { local | engineid
engineid-string }
View
Huawei Technologies Proprietary
3-4
Chapter 3 ACL Control Commands to Control
Login Users