Delete Uniaddr - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches

1.3.3 delete uniaddr

Syntax
delete uniaddr mac-addr
View
lanswitch view
Parameter
mac-addr: MAC address of the unicast entry to be deleted.
Description
Use the delete uniaddr command to remove a unicast address entry of an Ethernet
switch.
Related command: search uniaddr.
Example
# Remove the unicast address entry with a MAC address of 00e0-fc01-1001 on the
Ethernet switch with a position parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] delete uniaddr 00e0-fc01-1001
Waiting.....
==============Deleting Mac Result============
No. ErrId
0
=======================End===================
ErrId Mean:0-Success,1-Invalid Mac,2-vlanId out range
Table 1-7 Description on the fields of the delete uniaddr command
Field
No
ErrId
Mac-Addr
VlanId
Mac-Addr
0 00-e0-fc-01-10-01
2-vlanId out range(1-4095)
5-No Found AddrTab,other-Unkown Cause
MAC address entry number
The error number of this operation, which can be the following:
0: The operation is successful.
1: Error caused by the VLAN ID and MAC address.
2: The VLAN ID out of range.
5: Other errors.
The MAC address involved.
The VLAN ID the MAC address corresponds to.
Huawei Technologies Proprietary
Chapter 1 HGMP V1 Configuration Commands
VlanId
-
Description
1-29