Modify Multiaddr; Modify Uniaddr - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
================================End===================================
Note:
This command does not support configuring S2403F and S2403 Ethernet switches on
NMS.

1.3.7 modify multiaddr

Syntax
modify multiaddr mac-addr vlanid port-list mctype
View
lanswitch view
Parameter
mac-addr: MAC address of the multicast address entry to be modified.
vlanid: VLAN ID of the multicast group.
port-list: Port list for the multicast group.
mctype: Specifies how the multicast group forward data to the CPU.
no: Specifies not to forward to the CPU.
trans: Specifies to forward data to the CPU.
igmp: Specifies to forwards IGMP packets to the CPU.
Description
Use the modify multiaddr command to modify the multicast address entry of an
Ethernet switch.
Related command: search multicast.
Example
# Modify the multicast address entry of the Ethernet switch with a position parameter of
3/1/3-/.
[Quidway-lanswitch3/1/3-/] modify multiaddr
Waiting.....
Modify addr item successfully, Mac addr: 01-11-22-33-44-55

1.3.8 modify uniaddr

0xFF-doesn't change port stats, other-no support operation
Huawei Technologies Proprietary
1-32
Chapter 1 HGMP V1 Configuration Commands
0111-2233-4455 10 5 no