Display Cpu - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
Parameter
None
Description
Use the display boot-loader command to view APP file used this time and next time.
Example
<Quidway> display boot-loader
The primary app to boot of board 0 at the next time is: flash:/switch.app
The backup app to boot of board 0 at the next
The app to boot of board 0 at this time is: flash:/switch.app
Table 3-1 Description on the display boot-loader command
The app to boot of board 0 at the next
time is: flash:/Switch.app
The app to boot of board 0 at this time
is: flash:/PLAT.APP

3.1.4 display cpu

Syntax
display cpu [slot slot-no ]
View
Any view
Parameter
slot slot-no: Specifies the board number.
Description
Use the display cpu command to display CPU occupancy.
Example
# Display CPU occupancy on slot 0.
<Quidway> display cpu slot 0
Board 0 CPU busy status:
6% in last 5 seconds
7% in last 1 minute
12% in last 5 minutes
Field
Huawei Technologies Proprietary
3-3
Chapter 3 Device Management Commands
time is: flash:/switch.app
Description
Startup file used on startup next time
Startup file used on startup this time