Static-Lsp Ingress - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Description
Use the static-lsp egress l2vpn command to create a static L2VPN LSP for the egress
label switching router (LSR).
Use the undo static-lsp egress command to remove a L2VPN LSP created for the
egress LSR.
You need to create two LSPs (for transmitting and receiving) before creating a remote
CCC connection.
Related command: static-lsp ingress l2vpn, static-lsp transit l2vpn, debugging
mpls.
Example
# Create a static LSP named bj-sh on the egress LSR.
[Quidway-mpls]
vlan-interface 201 in-label 233

3.1.5 static-lsp ingress

Syntax
static-lsp ingress lsp-name l2vpn nexthop next-hop-addr out-label out-label
undo static-lsp ingress lsp-name
View
MPLS view
Parameter
lsp-name: Name of the LSP.
next-hop-addr: Address of the next hop.
out-label: Value of the out-label, ranging from 16 to 1,023.
Description
Use the static-lsp ingress l2vpn command to create a static L2VPN LSP for the
ingress LSR.
Use the undo static-lsp command to remove a static L2VPN LSP.
You need to create two LSPs (for transmitting and receiving) before creating a remote
CCC connection.
Related command: static-lsp engress l2vpn, static-lsp transit, debugging mpls.
Chapter 3 MPLS L2VPN Configuration Commands
static-lsp egress
Huawei Technologies Proprietary
3-4
bj-sh l2vpn incoming-interface