Display Mpls Ldp; Display Mpls Ldp Buffer-Info - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
<Quidway> debugging mpls ldp all

1.2.2 display mpls ldp

Syntax
display mpls ldp
View
Any view
Parameter
None
Description
Use the display mpls ldp command to display LDP and LSR information.
By default, it displays information of LDP and LSR.
Related command: mpls ldp, mpls ldp hops-count, mpls ldp loop-detection and
mpls ldp path-vectors.
Example
# Display LDP and LSR information.
<Quidway> display mpls ldp
Label Distribution Protocol: V1
LSR ID: 10.10.10.10
Loop Detection: Disabled.
Path Vector Limit: 32
DU Readvertisement: On
Label Retention Mode: Liberal
Label Distribution Control Mode: Ordered.

1.2.3 display mpls ldp buffer-info

Syntax
display mpls ldp buffer-info
View
Any view
Parameter
None
Chapter 1 MPLS Basic Configuration Commands
LSR Status: Active
Hop Count Limit: 32
Request
DU Explicit Request: Off
Huawei Technologies Proprietary
1-12
Retry: Off