Debugging Mpls L2Vpn; Display Mac-Address Vsi - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches
[Quidway-vsi-Huawei-ldp] description Huawei Technologies Co., Ltd.

3.1.4 debugging mpls l2vpn

Syntax
debugging mpls l2vpn { advertisement | all | connections | error | event }
undo debugging mpls l2vpn { advertisement | all | connections | error | event }
View
User view
Parameter
advertisement: Enables debugging for L2VPN signaling protocol.
all: Enables all types of debugging concerning L2VPN module.
connections: Enables debugging for MPLS layer 2 VC connections.
error: Enables debugging for L2VPN errors.
event: Enables debugging for event notification among modules.
Description
Use the debugging mpls l2vpn command to enable individual kinds of L2VPN
debugging.
Use the undo debugging mpls l2vpn command to disable the corresponding
debugging.
By default, all L2VPN debugging is disabled.
Example
# Enable debugging for L2VPN errors.
<Quidway> debugging mpls l2vpn error

3.1.5 display mac-address vsi

Syntax
display mac-address vsi [ vsi-name ] [ peer peer-address | local | [ dynamic | static ]
[ count ] | count ]*
View
Any view
Parameter
peer peer-address: Specifies the peer IP address.
Huawei Technologies Proprietary
3-3
Chapter 3 VPLS Configuration Commands