Set Qos_Weight; Set Superview_Password - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Description
Use the set priority command to set the priorities of specifies ports.
Related command: set qos-weight.
Example
# Set the port 1 of the Ethernet switch with a position parameter of 3/1/3-/ to be of high
priority.
[Quidway-lanswitch3/1/3-/] set priority high 1

1.3.35 set qos_weight

Syntax
set qos_weight weight
undo set qos_weight
View
lanswitch view
Parameter
weight: QoS weights of the ports with high priority, in the range of 1 to 10.
Description
Use the set qos_weight command to set the QoS weights of the ports of an Ethernet
switch with high priority.
Use the undo set qos_weight command to remove the setting.
The QoS weights of the ports with low priority are fixed to 1. By executing the set
qos_weight command, you can have the ratio of the number of packets forwarded by
ports with high priority to those with low priority ports is weight : 1.
Related command: set priority.
Example
# Set the QoS weight of ports with high priority of the Ethernet switch to 10.
[Quidway-lanswitch3/1/3-/] set qos_weight 10

1.3.36 set superview_password

Syntax
set superview_password password
undo set superview_password
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-56