Huawei Quidway S8500 Series Command Manual page 888

Command Manual – Security
Quidway S8500 Series Routing Switches
undo accounting optional
View
ISP domain view
Parameter
None
Description
Use the accounting optional command to enable accounting to be optional.
Use the undo accounting optional command to disable accounting to be optional.
By default, accounting is not optional. By executing the accounting optional
command, you can enable users to utilize the network resources even when no
accounting server is available or the switch fails to communicate with the accounting
server. Users are denied if you do not execute this command under the same
circumstance. This command is used when you want the server to authenticate without
charging.
Example
# Enable accounting option for domain user named huawei163.net.
[Quidway] domain huawei163.net
[Quidway-isp-huawei163.net] accounting optional
2.1.3 attribute
Syntax
attribute { ip ip-address | mac mac-address | idle-cut second | access-limit
max-user-number | vlan vlanid | location { nas-ip ip-address port portnum | port
portnum }*
undo attribute { ip | mac | idle-cut | access-limit | vlan | location }*
View
Local user view
Parameter
ip: Specifies the IP address of a user.
mac mac-address: Specifies the MAC address of a user. Where, mac-address takes on
the hexadecimal format of X-X-X.
idle-cut second: Allows/Disallows the local users to enable the idle-cut function. (The
specific data for this function depends on the configuration of the ISP domain where the
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-2
Configuration Commands