Slave Restart - Huawei Quidway S8500 Series Command Manual

Command Manual – Reliability
Quidway S8500 Series Routing Switches
undo slave auto-update config
View
System view
Parameter
None
Description
Use the slave auto-update config command to enable automatic synchronization
between the master and slave systems.
Use the undo slave auto-update config command to disable automatic
synchronization between the master and slave systems.
By default, automatic synchronization is enabled.
Related command: slave update config.
Example
# Enable automatic synchronous switch between master/slave systems.
[Quidway] slave auto-update config

2.1.5 slave restart

Syntax
slave restart
View
User view
Parameter
None
Description
Use the slave restart command to restart slave board.
When the slave system works abnormally, and needs to be reloaded, you can use this
command to restart the slave board.
Example
# Implement the restart of the slave system.
<Quidway> slave restart
The slave will reset! Continue?[Y/N]:y
Huawei Technologies Proprietary
2-3
Chapter 2 HA Configuration Commands