Reset Urpf Statistic; Urpf Enable - Huawei Quidway S8500 Series Command Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches

2.1.2 reset urpf statistic

Syntax
reset urpf statistic
View
VLAN interface view
Parameter
None
Description
Use the reset urpf statistic command to clear URPF statistical counters to zero.
When a VLAN interface with URPF enabled runs for a long time, more statistical data
enter the counter. Therefore you need to clear statistical data related to URPF on the
port. To clear recording statistics of received and discarded data packets on the port,
execute the reset urpf statistic command. As a result, the URPF statistical counter is
cleared to zero.
Example
# Clear URPF statistical counters to zero.
[Quidway-Vlan-interface100] reset urpf statistic

2.1.3 urpf enable

Syntax
urpf enable to slot slotid
undo urpf enable
View
VLAN interface view
Parameter
slotid: Numbers of the slot where service processor cards implementing URPF check is
located.
Description
Use the urpf enable command to enable URPF on a certain VLAN port, and specify the
corresponding service processor card for handling.
Use the undo urpf enable command to disable URPF on a certain VLAN port.
Huawei Technologies Proprietary
2-2
Chapter 2 URPF Configuration Commands