Set Mirror Monitor-Port; Set Port - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Note:
This command is only applicable to the configuration of S2008, S2016 and S3026
Ethernet switches on the NMS.

1.3.32 set mirror monitor-port

Syntax
set mirror monitor-port monitor-port [ port-list ]
undo set mirror
View
lanswitch view
Parameter
monitor-port: Monitor port.
port-list: List of ports to be mirrored.
Description
Use the set mirror monitor -port command to set Ethernet port mirroring.
Use the undo set mirror command to remove the configuration.
You cannot specify a trunk port as a monitor port. The existing monitor port is
automatically removed if you set a new monitor port. But the mirroring port remains
unchanged.
Related command: query mirror.
Example
# Set the port 1 of the Ethernet switch with a position parameter of 3/1/3-/ to be a
monitor port.
[Quidway-lanswitch3/1/3-/] set mirror monitor-port 1

1.3.33 set port

Syntax
set port port-list vlanid vlan-id-list [ tagged | untagged ]
View
lanswitch view
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-54