Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
View
lanswitch view
Parameter
password: Password. It is a clear password that is of 1 to 16 characters in length.
Description
Use the set superview_password command to set a password.
Use the undo set superview_password command to remove the setting.
Example
# Set the authentication password of the Ethernet switch with a position parameter of
3/1/3-/ to darling.
[Quidway-lanswitch3/1/3-/] set superview_password darling
1.3.37 set sysname
Syntax
set sysname name-word
View
lanswitch view
Parameter
name-word: Domain name, a string that is of no more than 30 characters in length.
Description
Use the set sysname command to set the domain name of an Ethernet switch.
Example
# Set the domain name of the Ethernet switch with a position parameter of 3/1/3-/ to
host1.
[Quidway-lanswitch3/1/3-/] set sysname host1
1.3.38 set vdsllink
Syntax
set vdsllink port-list uprate uprate-list downrate downrate-list
View
lanswitch view
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-57