Ip Vpn-Instance - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Description
Use the ip route-static vpn-instance command to configure a static route by
specifying an interface of a private network as a egress interface.
Use the undo ip route-static vpn-instance command to delete the configuration of
this static route.
Example
# Configure a static route with destination address 100.1.1.1 and next hop address
1.1.1.2.
[Quidway] ip route-static vpn-instance vpn1 100.1.1.1 16 vpn-instance vpn1
1.1.1.2

2.1.22 ip vpn-instance

Syntax
ip vpn-instance vpn-instance-name
undo ip vpn-instance vpn-instance-name
View
System view
Parameter
vpn-instance-name: Name assigned to VPN-instance.
Description
Use the ip vpn-instance command to create a VPN instance and enter VPN instance
view.
Use the undo ip vpn-instance command to delete the specified VPN instance.
By default, VPN-instance is not defined. Neither input nor output list is associated with
VPN-instance. No Route-map is associated with VPN-instance.
Use the ip vpn-instance command to create a VPN-instance named vpn-name.
Example
# Create the VPN instance VPN 1.
[Quidway] ip vpn-instance vpn1
[Quidway-vpn-vpn1]
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-20