Speed Port - Huawei Quidway S8500 Series Command Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
Description
Use the set vlanid command to set the VLAN attribute for the Ethernet switch and add
the specified ports to a specified VLAN.
Use the undo set vlanid command to remove VLAN configuration.
Example
# Add to the VLAN 2 the port 1 through 4 of the Ethernet switch 3/1/3-/.
[Quidway-lanswitch3/1/3-/] set vlanid 2 1-4
Waiting.....
Modifying LANSWITCH[3/1/3-/]'s VlanID successfully!

1.3.40 speed port

Syntax
speed port port-list { auto | 10m | 100m| 1000m}
View
lanswitch view
Parameter
port-list: List of ports.
auto: Specifies to operate in automatic negotiation mode.
10m: Specifies to operate at a speed of 10 Mbps.
100m: Specifies to operate at a speed of 100 Mbps.
1000m: Specifies to operate at a speed of 1000 Mbps.
Description
Use the speed port command to set a port rate for specified ports of an Ethernet
switch.
Ethernet ports that are of 10/100Base-T can operate at a speed of 10 Mbps or 100
Mbps. Whereas Ethernet optical ports that are of 100M can operate at a speed of 100
Mbps and 1000 Mbps..
Example
# Set the port rate to 10Mbit/s for the port 1 through 4 of the Ethernet switch with a
position parameter of 3/1/3-/.
[Quidway-lanswitch3/1/3-/] speed port 1-4 10m
Waiting.....
operating LANSWITCH[3/1/3-/]'s ports successfully
Chapter 1 HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-59