Debugging Radius; Display Local-Server - Huawei Quidway S8500 Series Command Manual

Command Manual – Security
Quidway S8500 Series Routing Switches
Description
Use the data-flow-format command to configure the unit of data flow that send to
RADIUS Server.
Use the undo data-flow-format command to restore the unit to the default setting.
By default, the data unit is byte and the data packet unit is one-packet.
Related command, see display radius.
Example
# Set the unit of data flow that send to RADIUS Server Huawei is kilo-byte and the data
packet unit is kilo-packet.
[Quidway-radius-huawei] data-flow-format data kilo-byte packet kilo-packet

2.2.3 debugging radius

Syntax
debugging radius packet
undo debugging radius packet
View
User view
Parameter
packet: Enable packet debugging
Description
Use the debugging radius command to enable RADIUS packet debugging.
Use the undo debugging radius command to disable RADIUS packet debugging.
By default, RADIUS packet debugging is disabled.
Example:
# Enable RADIUS packet debugging.
<Quidway> debugging radius packet

2.2.4 display local-server

Syntax
display local-server { statistics | nas-ip }
View
Any view
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Huawei Technologies Proprietary
2-24
Configuration Commands