Undo Snmp-Agent - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
SNMP engineID (for authentication) is required when configuring remote user for an
agent. This command will not be effective without engineID configured.
For V1 and V2C, this command will add a new community name. For V3, it will add a
new user for an SNMP group.
Example
# Add a user wang for huawei (an SNMP group), configures to authenticate with MD5
and sets authentication password as pass.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent usm-user v3 wang huawei authentication-mode md5 pass

5.1.21 undo snmp-agent

Syntax
undo snmp-agent
View
System view
Parameter
None
Description
Use the undo snmp-agent command to disable all versions of SNMP running on the
server.
Perform any command of snmp-agent will enable SNMP Agent.
Example
# Disable the running SNMP agents of all SNMP versions.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo snmp-agent
Huawei Technologies Proprietary
5-21
Chapter 5 SNMP Configuration Commands