Snmp-Agent Group - Huawei Quidway S8500 Series Command Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
read: Indicates that this community name has the read-only right within the specified
view.
write: Indicates that this community name has the read-write right within the specified
view.
community-name: Community name, consisting of 1 to 32 characters.
mib-view: Set the MIB view name which can be accessed by the community name.
view-name: MIB view name, consisting of 1 to 32 characters.
acl acl-number: The number identifier of basic number-based ACLs, ranging from 2000
to 2999.
Description
Use the snmp-agent community command to set the community access name,
permit the access to the switch using SNMP, and reference the ACL to perform ACL
control to the network management users by acl-number.
Use the undo snmp-agent community command to remove the setting of community
access name.
By default, SNMPV1 and SNMPV2C use community name to perform access.
Example
# Set the community name as "Huawei", permit the user to perform read-only access by
using this community name, and reference the ACL 2000 to perform ACL control to the
network management users (basic ACL 2000 has already been defined ).
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent community read huawei acl 2000

3.1.3 snmp-agent group

Syntax
snmp-agent group { v1 | v2c } group-name [ read-view read-view ] [ write-view
write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group { v1 | v2c } group-name
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view
read-view ] [ write-view write-view ] [ notify-view notify-view ] [ acl acl-number ]
undo snmp-agent group v3 group-name [ authentication | privacy ]
View
System view
Parameter
Huawei Technologies Proprietary
3-3
Chapter 3 ACL Control Commands to Control
Login Users