Huawei Quidway S8500 Series Command Manual page 1247

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches
View
Any view
Parameter
all: Specifies to display all registered Ethernet switches.
port slot subslot port: Specifies an Ethernet port of the management device to display
the Ethernet switches registering with the management device through the Ethernet
port. Argument of slot, subslot, and port are slot number, subslot number and port
number respectively.
position lanswitch-loc: Specifies to display the Ethernet switch at a specified position.
The lanswitch-loc argument is the position parameter for the Ethernet switch.
error: Displays the Ethernet switches that operate improperly after registering.
inactive: Specifies to display Ethernet switches that are inactive after registering.
Description
Use the display lanswitch command to display the information about specified
registered Ethernet switches. The information includes those about the Ethernet
switches connected to the port. If the Ethernet switches are connected to the port and
registered successfully, information about the management MAC address, device ID,
state and so on is displayed.
Example
# Display the information about all registered Ethernet switches.
<Quidway> display lanswitch all
Lanswitch list.........
------------------
No. 1
------------------
Position
PortMode
Lanswitch Name
Model
Device ID
MacAddr
Status
Table 1-2 Description on the fields of the display lanswitch command
Position
PortMode
: LANSWITCH[3/1/6-/]
: TREE-MODE
:
: Quidway S2403F
: V43.f.2
: 00-e0-fc-01-01-01
: NORMAL
Field
The position of the switch connected to management device
The mode of the ports the switch connected to
Huawei Technologies Proprietary
Chapter 1 HGMP V1 Configuration Commands
Description
1-7