Huawei Quidway S8500 Series Command Manual page 548

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
View
VLAN interface view
Parameter
interface-type: Proxy interface type.
interface-number: Proxy interface number.
Description
Use the igmp proxy command to enable IGMP proxy for the VLAN interface and
specify the IGMP proxy interface of the VLAN interface.
Use the undo igmp proxy command to remove IGMP proxy configuration.
By default, IGMP proxy is disabled on a VLAN interface.
Caution:
You need to enable PIM protocol for a VLAN interface before executing the igmp
proxy command in its VLAN interface view.
If you configure the IGMP proxy interface for a VLAN interface multiple times, the
latest configured IGMP proxy interface will take effect.
A VLAN interface cannot be the IGMP proxy interface for two or more other VLAN
interfaces simultaneously.
Example
# Enable IGMP proxy for the interface of VLAN 100 and specify the interface of VLAN
200 to be its IGMP proxy interface.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface vlan-interface 100
[Quidway-vlan-interface100] igmp proxy vlan-interface 200
Huawei Technologies Proprietary
4-16
Chapter 4 IGMP Configuration Commands