Mac-Address - Huawei Quidway S8500 Series Command Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches
mac-addr: Specifies the MAC address.
vlan-id: Specifies the VLAN ID.
static: Static table entry, that is no aging, If the configuration is saved, it can be restored
after the switch is reset.
dynamic: Dynamic table entry, which will be aged.
interface-type: Specifies the interface type.
interface-number: Specifies the interface number.
count: the display information will only contain the sum number of MAC addresses in
the MAC address table if user choice this parameter when using this command.
Description
Use the display mac-address command to view MAC address table information.
When managing the Layer-2 addresses of the switch, the administrator can perform
this command to view such information as the Layer-2 address table, address status
(static or dynamic), Ethernet port of the MAC address, VLAN of the address, and
system address aging time.
Related command: mac-address, mac-address timer.
Example
# Show the information of the entry with MAC address at 00e0-fc01-0101
<Quidway> display mac-address 00e0-fc01-0101
MAC ADDR
00e0-fc01-0101
Table 2-1 Description on the fields of the display mac-address command on display
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)

2.1.3 mac-address

Syntax
mac-address { static | dynamic } mac-addr interface interface-type interface-number
vlan vlan-id
VLAN ID
1
Field
The destination MAC address
The VLAN of the MAC address
The state of the item, which can be Learned, Config static
The forwarding port
The aging time
Huawei Technologies Proprietary
Chapter 2 MAC Address Table Management
STATE PORT INDEX
Learned Ethernet1/1/1
Description
2-2
Commands
AGING TIME(s)
300