Default Local-Preference - Huawei Quidway S8500 Series Command Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches
verbose: Displays detailed information.
Description
Use the debugging bgp command to enable BGP debugging..
Use the undo debugging bgp command to disable BGP debugging.
Caution should be taken in deciding to enable BGP debugging, since debugging affects
system performance. Remember to disable the debugging when it is completed.
Example
# Enable the debugging on the detailed information about BGP Keepalive packets.
<Quidway> debugging bgp keepalive verbose

2.1.4 default local-preference

Syntax
default local-preference value
undo default local-preference
View
VPNv4 subaddress family view
Parameter
value: Value of the local precedence, ranging from 0 to 4294967295. A greater value
enjoys higher precedence. The default local precedence is 100.
Description
Use the default local-preference command to configure the local precedence for BGP
routing in VPN.
Use the undo default local-preference command to restore the default configuration.
The value of the local precedence is advertised between IBGP peers and you can
affect the BGP routing in VPN by changing the precedence.
Example
# Set the local precedence to be 180, so that the system-advertised routing information
will be preferred.
[Quidway-bgp-af-vpn] default local-preference 180
Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-4