Huawei Quidway S8500 Series Command Manual page 748

Command Manual – MPLS
Quidway S8500 Series Routing Switches
Example
# Display MPLS L3VPN transit lsp information on the ASBR.
<Quidway> display mpls l3vpn-lsp transit
-----------------------------------------------------------------------
-----------------------------------------------------------------------
NO I/O-LABEL
1 1025/3
2 1024/3
3 1026/1024
TOTAL:
Table 2-2 Description of the command information on display
Field
NO
I/O-LABEL
NEXTHOP
IN-INTERFACE
OUT-INTERFACE
# Display MPLS L3VPN ingress lsp information on PE (Provider Edge).
<Quidway> display mpls l3vpn-lsp ingress
-----------------------------------------------------------------------
-----------------------------------------------------------------------
Vpn-instance Name: vpna
NO FEC
1 168.3.1.0/24
TOTAL:
LSP Information: Ebgp Transit Lsp
NEXTHOP
30.30.1.2
10.10.1.2
30.30.1.2
3 Record(s) Found.
Number
Incoming/Outgoing label. VPN labels (labels advertised with
VPNV4 routes) will be displayed in case of uni-hop EBGP
cross-AS MPLS L3 VPN networking, and tunneling labels
(labels advertised with unicast routes and labels advertised by
LDP protocol) will be displayed in case of multi-hop EBGP
cross-AS MPLS L3 VPN networking.
Next hop
Ingress interface
Egress interface
LSP Information: L3vpn Ingress Lsp
NEXTHOP
10.10.1.1
1 Record(s) Found.
Huawei Technologies Proprietary
Chapter 2 BGP/MPLS VPN Configuration Commands
IN-INTERFACE
Description
Route Distinguisher: 100:1
OUTER-LABEL OUT-INTERFACE
1026(vpn)
2-10
OUT-INTERFACE
------- Vlan20
------- Vlan10
------- Vlan20
Vlan10