Huawei Quidway S8500 Series Command Manual page 705

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches
View
Any view
Parameter
vlan-id: VLAN ID, in the range of 1 to 4,094.
Description
Use the display vlan-acl-member-ports command to view in this VLAN the ports with
the ACL configuration of the VLAN synchronized to.
When a port is added to a VLAN, you may fail to synchronize the VLAN-ACL
configuration of the VLAN because the resources are not enough or user-defined flow
templates are applied to ports. You can use this command to view the ports to which the
ACL rule configured on the specified VLAN is applied.
Example
# View the ports to which the ACL rule configured on VLAN 5 is applied.
<Quidway>display vlan-acl-member-ports vlan 5
Vlan-acl member port(s):
Ethernet2/1/11
Ethernet2/1/22
Ethernet2/1/25
Chapter 4 VLAN-ACL Configuration Commands
Ethernet2/1/20
Ethernet2/1/23
Ethernet2/1/40
Huawei Technologies Proprietary
4-11
Ethernet2/1/21
Ethernet2/1/24