Reset Vrrp Statistics - Huawei Quidway S8500 Series Command Manual

Command Manual – Reliability
Quidway S8500 Series Routing Switches
15
16
17
Table 1-2 Description on the fields of the display vrrp summary command
Run Method
Virtual IP ping
VRID
Adver.Timer
State
Run Pri
Auth Type
Virtual IP

1.1.5 reset vrrp statistics

Syntax
reset vrrp statistics [ vlan-interface interface-number [ virtual-router-ID ] ]
View
User view
Parameter
statistics: VRRP statistics.
vlan-interface interface-number: Interface name.
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
Description
Use the reset vrrp statistics command to clear the statistics information about VRRP.
If the interface name and virtual router ID are not specified, the statistics information
about all the virtual routers on the switch will be cleared. If only the interface name is
specified, the statistics information about all the virtual routers on the interface will be
cleared. If the interface name and virtual router ID are specified, the statistics
information about the specified virtual router on the interface will be cleared.
15 Initialize
16 Initialize
17 Initialize
Field
Huawei Technologies Proprietary
Chapter 1 VRRP Configuration Commands
100 1 NONE
100 1 NONE
100 1 NONE
Description
Run method: real or virtual MAC method
Whether to enable to ping through virtual IP
address
ID of virtual router
Interval for sending vrrp packets
Running state of virtual router
Run priority
Authentication type
Virtual IP address list of virtual router
1-5
15.15.15.192
16.16.16.192
17.17.17.192